Automated picking
Lumper deploys autonomous case picking robots into your existing warehouse with no upfront cost, no retrofitting, and a simple pay-per-pick model that scales with your volume.
The problem
Case picking is physically brutal, drives some of the highest turnover in any warehouse, and it never stops. Traditional automation means six-figure equipment purchases, months of integration work, and rebuilding your layout. Temp labor fills the gap but adds cost and inconsistency. Neither option works for the 90% of warehouses that need a better answer today.
What you get
Pay Per Pick
Lumper is priced by the pick, not sold as equipment. There is no capital purchase, no lease, and no retrofit bill. You pay for output, so cost scales directly with the volume your warehouse actually moves.
Deploys In Hours
Robots deploy into your existing warehouse in hours, not months. Live spatial mapping reads your racks, pallets, and floor-loaded inventory as-is, so there is no layout rebuild or downtime before your first pick.
Heavy Cases
Lumper robots pick boxed goods up to 65 lb autonomously, covering the heavy cases that cause the most lifting injuries and push workers off the job. Your team stops absorbing the physical punishment of the hardest picks.
Mixed SKU
No pre-sorting, no SKU setup, no dedicated lanes. Robots handle mixed-SKU cartons across your pick floor just as a worker would, reading inventory live and adapting pick by pick without manual reconfiguration.
Throughput
Each robot runs 16 hours per charge and picks at 150 cases per hour, covering a full shift without breaks, call-outs, or turnover gaps. Your pick rate holds steady regardless of staffing on the floor.
Common questions
Lumper robots handle autonomous case picking of mixed-SKU boxed goods on your pick floor. Each robot reads your existing rack and floor-loaded inventory using live spatial mapping, picks cases up to 65 lb, and moves at 150 cases per hour. Remote human operators step in to handle edge cases when needed. The robots do the physical labor so your team does not have to.
Robots deploy into your existing warehouse in hours. There is no layout rebuild, no new infrastructure, and no retrofitting required. Live spatial mapping means the robots learn your warehouse as it is today, not a version of it you have to build toward. You do not need to shut down operations or plan around a long installation timeline.
Lumper is priced on a pay-per-pick model with no upfront cost. You are not buying equipment or signing a capital lease. You pay based on the number of picks the robots complete, which means your cost is tied directly to the output you receive. There is no large CapEx commitment before you see results.
Lumper robots handle mixed-SKU cartons of boxed goods up to 65 lb without any pre-sorting or dedicated lane setup. The robots use live spatial mapping to adapt to your inventory as-is, pick by pick. This covers the heavy, high-mix case picking that most automation products are not built for and that temp labor finds the most physically demanding.
No. Lumper plugs into your existing ERP, WMS, or WES without replacing or rebuilding anything. Your current systems stay in place. The robots work within your existing layout using live spatial mapping, so there is no need to reconfigure aisles, install fixed infrastructure, or go through a lengthy IT integration before picking begins.
Talk to our team about deploying autonomous case picking robots into your warehouse with no upfront cost and no retrofitting.
